in

Lumïn P2 Brings Streaming, DAC and Preamp Roles Together

The Lumïn P2 is a high-end network music hub combining streaming, dual ESS ES9038PRO DACs, femto clocks, and a linear power supply with toroidal transformers. Supporting PCM 32-bit/384kHz and DSD512, it delivers reference-grade digital playback, preamp functionality, and seamless integration with Roon, TIDAL, Qobuz, and HDMI ARC systems.
Designed as the center of a modern two-channel system, the Lumïn P2 combines network playback, digital conversion, source management and volume control. Its broad connectivity, dual-mono DAC architecture and television-friendly HDMI features make it more than a conventional music streamer.

The Lumïn P2 addresses a familiar challenge in contemporary hi-fi: combining music streaming, traditional sources and television sound without filling the system with separate control components. It is a full-width network music hub that can serve as a streamer, DAC, digital preamplifier or central source component, depending on how the rest of the system is configured. That breadth is its defining attraction. Rather than treating network playback as an isolated function, Lumïn has designed the P2 to coordinate digital music services, local playback, external digital and analog sources, volume control and HDMI-connected video equipment from one enclosure.

One component with several possible roles

The P2 continues the hub concept established by the earlier P1. Its purpose is not limited to sending a fixed-level signal from a streaming service to an existing amplifier. It incorporates digital-to-analog conversion, input switching and preamplifier functionality, allowing it to occupy different positions within a system.

In a conventional installation, the P2 can operate as a network source feeding an integrated amplifier or separate preamplifier. Owners who want to use its internal conversion can connect its analog outputs, while systems built around another DAC can use the P2 for streaming and digital signal management. Lumïn also proposes connecting it directly to a power amplifier, using the company’s Leedh Processing volume control rather than adding a traditional analog preamplifier.

This flexibility is useful when a system changes over time. A prospective owner might initially use the P2 as a streamer and DAC with an integrated amplifier, then retain it as the central control component after moving to a separate power amplifier. Consolidating several functions may also appeal where equipment-rack space, cable count or operational simplicity matters.

Lumïn P2 high-end network music hub with streaming, DAC and preamplifier functions
The Lumïn P2 combines network playback, dual-mono ESS conversion, source switching, HDMI ARC and volume control in a single full-width component.

High-resolution processing and dual-mono conversion

Lumïn has equipped the P2 with its latest System-on-Chip processing architecture. The additional processing capacity is intended for operations such as upsampling and digital signal management, while supported playback extends to PCM at up to 32-bit/384kHz and native DSD512. Those limits provide compatibility with a wide range of high-resolution libraries, even though the practical value will depend on the formats an owner actually uses.

Digital-to-analog conversion is handled by two ESS ES9038PRO SABRE DAC chips arranged in a dual-mono configuration. Assigning separate converter resources to the left and right channels reflects the P2’s position as a high-end source and control component rather than a basic network transport.

The analog output stage also incorporates Lundahl output transformers. Their stated purpose is to support signal isolation and channel separation. This combination of dual DAC chips, dual-mono organization and transformer-coupled output design shows that the analog section has been treated as a central part of the product rather than as a convenience added to the streaming platform.

Lumïn P2 high-end network music hub with streaming, DAC and preamplifier functions
The Lumïn P2 combines network playback, dual-mono ESS conversion, source switching, HDMI ARC and volume control in a single full-width component.

Power and clocking receive dedicated attention

The P2 integrates a linear power supply within its full-width chassis. It uses two toroidal transformers, with separate supply rails for its analog and digital circuitry. Lumïn’s rationale is to improve power stability while limiting noise transferred into the signal path.

That separation is relevant in a component containing network hardware, high-speed digital processing, conversion circuitry and an analog output stage. Housing all of those functions together is convenient, but it also places different electrical demands inside the same enclosure. Dedicated analog and digital power arrangements are therefore an important part of the P2’s integrated design.

Signal timing is managed through a dual femto-clock system with FPGA-based clock distribution. The architecture is intended to minimize jitter and preserve accurate timing as digital signals move through the player. While specifications alone cannot describe how a component will perform in every system, the clock and power arrangements demonstrate where Lumïn has concentrated its engineering effort.

Lumïn P2 high-end network music hub with streaming, DAC and preamplifier functions
The Lumïn P2 combines network playback, dual-mono ESS conversion, source switching, HDMI ARC and volume control in a single full-width component.

Inputs for hi-fi sources and television sound

A network hub needs to accommodate more than network audio, and the P2 provides a total of nine digital and analog inputs. The available connection types include USB, S/PDIF, AES, balanced and unbalanced analog inputs, and HDMI. This allows legacy analog equipment and modern digital sources to share the same control point.

HDMI 2.0 adds 4K video passthrough, Audio Return Channel compatibility and CEC volume control. These features allow a television to become part of a two-channel audio system without requiring a separate AV receiver. ARC carries television audio back to the P2, while CEC is intended to make volume operation more straightforward with compatible equipment.

This is particularly attractive for listeners who prioritize stereo music reproduction but also want their main loudspeakers to handle films, television programs or games. The P2 does not attempt to become a multichannel home-theater processor; instead, its HDMI implementation supports a more focused two-channel media system.

Lumïn P2 high-end network music hub with streaming, DAC and preamplifier functions
The Lumïn P2 combines network playback, dual-mono ESS conversion, source switching, HDMI ARC and volume control in a single full-width component.

Network isolation and a broad software ecosystem

Alongside conventional networking, the P2 supports fiber-optic network connections. Fiber provides galvanic isolation from a standard Ethernet network, helping to prevent electrical interference from traveling along the network connection into the audio system. It is an uncommon but purposeful option for installations where network infrastructure and electrical isolation are important considerations.

Day-to-day control is available through Lumïn’s application for iOS and Android. The P2 also supports Roon, JPLAY and Audirvana, giving owners alternatives to the manufacturer’s own interface. That matters because software preference can be as personal as hardware configuration in a network-based system.

Integrated service support includes Spotify Connect, Tidal with Tidal Max, Qobuz, KKBOX, TuneIn, Amazon Music and AirPlay. The range covers lossless subscription platforms, radio, mainstream streaming and playback from Apple devices. Service availability and account requirements may vary, but the documented selection gives the P2 access to several established listening ecosystems.

Lumïn P2 high-end network music hub with streaming, DAC and preamplifier functions
The Lumïn P2 combines network playback, dual-mono ESS conversion, source switching, HDMI ARC and volume control in a single full-width component.

System matching and practical ownership

The P2’s most direct system partner is a power amplifier, including Lumïn’s own two-channel Amp, because its source selection and Leedh Processing volume control allow it to manage level directly. It can also feed active loudspeakers when their input requirements are compatible, or sit ahead of an integrated amplifier if the owner prefers to retain conventional amplification and volume control.

Balanced and unbalanced analog connectivity broadens the range of equipment with which it can be used. The analog inputs are also significant for anyone retaining a phono stage, tuner or another line-level source. In that context, the P2 can reduce the divide between streaming and established hi-fi components rather than forcing an all-digital system.

Prospective owners should still decide which of the P2’s functions they genuinely need. A listener who already owns a preferred DAC and preamplifier may use only part of its architecture, while someone who needs multichannel processing will require a different type of component. Its strongest case is made when several of its roles—streaming, conversion, switching, television integration and volume control—can be used together.

Lumïn P2 high-end network music hub with streaming, DAC and preamplifier functions
The Lumïn P2 combines network playback, dual-mono ESS conversion, source switching, HDMI ARC and volume control in a single full-width component.

Who the Lumïn P2 is best suited to

The P2 is most suitable for listeners building a high-end, predominantly two-channel system around network music. It should be especially relevant to those who want fewer separate boxes without giving up extensive source connectivity, high-resolution format support or the option of balanced analog integration.

It also fits mixed music-and-television rooms where HDMI ARC and 4K passthrough can simplify operation. Roon, JPLAY and Audirvana users gain support for their preferred playback environments, while owners invested in major streaming platforms have a broad selection of integrated services.

Conversely, the P2 may be more elaborate than necessary for a system that needs only a basic fixed-output streamer. It is also not presented as a replacement for a multichannel processor. Its value lies in consolidating several serious two-channel functions, so it makes the most sense when that consolidation supports the owner’s actual system plans.

Conclusion

The Lumïn P2 stands out for combining a capable network platform, dual-mono ESS ES9038PRO conversion, transformer-equipped analog outputs, dedicated clocking and separated analog and digital power supplies in one full-width component. Nine inputs, fiber networking, broad software support and HDMI 2.0 with ARC extend its usefulness beyond music streaming alone. Its ideal audience is the listener seeking a central component for a high-end two-channel system—particularly one that must coordinate streaming, external sources, television audio and direct power-amplifier control without relying on several separate boxes.

STEREOINDEX COMMUNITY

Sound Off

0

Join the discussion if you have something to add.

Comments are closed for this article.
Latest from the community
TRN Black Pearl: A Compact DAC/Amp Powerhouse Built for Precision and Portability

TRN Black Pearl Brings Dual-DAC Flexibility to a Pocket Format