in

Auris Vivace Brings Tube Design to a Flexible Preamplifier

Auris Vivace
With three RCA inputs, three XLR inputs, two output formats, and an ECC88/ECC82 tube circuit, the Auris Vivace is designed to manage varied high-end analog systems.

The Auris Vivace is a substantial tube preamplifier created for systems that need more than a basic source selector and volume control. Auris Audio describes it as a reference model, supporting that position with an ECC88- and ECC82-based design, extensive analog connectivity, and a large aluminum enclosure. Its appeal lies not in one unusual feature, but in the way its design accommodates a broad collection of source components and different power-amplifier connection standards.

As a dedicated preamplifier, the Vivace occupies the control center of a separates-based audio system. It is intended to accept signals from analog sources, provide system-level control, and pass the selected signal to a separate power amplifier. That role makes connectivity especially important: a preamplifier may remain in a system while sources and amplifiers change around it. By including both RCA and XLR connections, the Vivace is configured with that longer-term flexibility in mind.

A Tube-Based Control Center

The Vivace is built around ECC88 and ECC82 tubes. Auris does not merely use tube-inspired styling; valves are part of the preamplifierโ€™s documented circuit design. The use of two established tube types will be of particular interest to owners who specifically want a valve-based line stage rather than a solid-state preamplifier or an integrated amplifier.

Auris has not provided enough information here to assign exact circuit duties to each tube type, so it would be inappropriate to speculate about topology or sonic character. What can be said is that the ECC88 and ECC82 are central to the Vivaceโ€™s identity. The product is consequently aimed at listeners building a component system around a dedicated tube preamplifier, while leaving power amplification to a separate chassis.

This separation also gives an owner freedom to choose a power amplifier according to the requirements of the loudspeakers and room. The Vivace can remain responsible for source management and preamplification without tying the system to the fixed amplifier section found in an integrated design. That modular approach can be useful in systems expected to evolve over time.

Six Inputs for Varied Analog Sources

The input panel provides three single-ended RCA inputs and three balanced XLR inputs. Six analog connections offer useful scope for systems containing several line-level sources, such as a digital-to-analog converter, streamer, CD player, tuner, tape machine, or an external phono stage. These are examples of suitable component categories rather than built-in Vivace functions; no onboard digital conversion, streaming, or phono stage is specified.

The even division between RCA and XLR is a practical design choice. Many established consumer audio components use RCA outputs, while an increasing number of high-end and professional-derived sources provide XLR connections. Owners therefore do not have to build the entire system around one connector format. They can retain RCA-equipped legacy components while also accommodating balanced-output electronics.

It is important not to infer the Vivaceโ€™s internal circuit topology solely from the presence of XLR sockets. Nevertheless, the physical availability of balanced connections is valuable for compatible source components and avoids relying on adapters simply to bridge different connection standards. For a preamplifier intended to anchor a multi-component installation, that versatility is a meaningful strength.

RCA and XLR Output Options

The Vivace also provides analog outputs in both RCA and XLR formats. This broadens power-amplifier compatibility and lets the preamplifier fit into systems assembled from components with differing input arrangements. An owner can choose the connection type supported by the partnering amplifier without being restricted to a single socket standard at the preamplifier end.

This flexibility can also matter when equipment is upgraded. Moving from an RCA-only power amplifier to a model with XLR inputs does not automatically require replacing the preamplifier. Conversely, the presence of RCA outputs keeps the Vivace relevant to the many tube and solid-state power amplifiers that rely on conventional single-ended inputs.

The documented information does not specify output quantities, simultaneous-output operation, or special routing functions. Prospective owners who intend to connect multiple power amplifiers, subwoofers, or other devices should therefore confirm those details with Auris or an authorized retailer. The clear advantage supported by the available specifications is format choice: both principal analog connection standards are represented on the input and output sides.

Auris Vivace tube preamplifier in its aluminum housing
The Auris Vivace combines an ECC88/ECC82 tube design with three RCA inputs, three XLR inputs, and RCA and XLR outputs.

A Substantial Aluminum Enclosure

The Vivace measures 470 mm wide, 520 mm deep, and 188 mm high, with a weight of 18.7 kg. Those figures describe a large and relatively heavy preamplifier rather than a compact desktop component. Its 520 mm depth is particularly important for installation planning, as the supporting rack or shelf must accommodate the chassis as well as the space needed for rear-panel plugs and cable bends.

An aluminum housing gives the Vivace a material identity consistent with its position as Auris Audioโ€™s reference-designated preamplifier. The enclosure also provides a suitably substantial structure for the internal electronics. Without published construction details or measurements, no additional claims about isolation, resonance, or shielding should be made, but the specified dimensions and weight indicate that Auris has not pursued minimal size.

Tube electronics also deserve thoughtful placement. Owners should follow the manufacturerโ€™s installation guidance and allow appropriate clearance rather than enclosing the Vivace in a space chosen only by its nominal dimensions. At 18.7 kg, the unit additionally calls for sturdy furniture and careful handling during setup. These practical considerations are not drawbacks so much as part of owning a full-size specialist component.

System Planning and Everyday Practicalities

The Vivaceโ€™s main usability advantage is straightforward system organization. Three RCA and three XLR inputs can reduce the need to disconnect equipment whenever the owner changes sources. A single preamplifier can serve as the central interface between multiple line-level components and a separate power amplifier.

Cable planning is an essential part of installation because cables are not included. Buyers will need appropriate interconnects for every source they intend to attach and another suitable pair for the connection to the power amplifier. The choice between RCA and XLR should be based on the available sockets and the requirements of the partnering equipment rather than an assumption that one connector alone guarantees a particular level of performance.

The lack of supplied cables can be convenient for experienced system builders who already own correctly terminated interconnects or want lengths tailored to a particular rack. New owners, however, should account for the additional accessories before installation. The chassis depth, connector clearance, ventilation requirements, and cable routing are all worth checking in advance.

Auris Vivace tube preamplifier in its aluminum housing
The Auris Vivace combines an ECC88/ECC82 tube design with three RCA inputs, three XLR inputs, and RCA and XLR outputs.

Who the Auris Vivace Is For

The Vivace is most suitable for an enthusiast assembling a dedicated separates system around analog line-level connectivity and a tube preamplifier. It is especially relevant when the source collection mixes RCA and XLR equipment, or when future power-amplifier changes may require a choice of output formats. Its six inputs make sense for an owner who uses several standalone components and values having them connected concurrently.

It is less naturally suited to someone seeking an all-in-one solution. The documented feature set does not include power amplification, digital inputs, wireless streaming, or a built-in phono stage. Any such functions would need to come from external components unless Auris separately specifies otherwise. Buyers who need a compact preamplifier should also consider the Vivaceโ€™s 470 x 520 x 188 mm dimensions carefully.

Likewise, prospective owners should be comfortable with the practical demands of tube electronics and a component weighing 18.7 kg. For the right installation, however, the Vivace offers a clear and coherent proposition: a dedicated valve preamplifier with broad analog connectivity, substantial construction, and the freedom to choose a separate power amplifier.

Conclusion

The Auris Vivaceโ€™s strongest documented qualities are its ECC88/ECC82 tube design, six analog inputs split evenly between RCA and XLR, and output support for both connection formats. Its aluminum housing and 18.7 kg weight reinforce its identity as a substantial full-size component, while the breadth of connectivity gives owners room to combine established and newer analog sources. It is best suited to experienced listeners building a spacious, component-based system who want a tube preamplifier at the center and prefer to select their sources, power amplifier, and cabling separately.

STEREOINDEX COMMUNITY

Sound Off

0

Join the discussion if you have something to add.

Comments are closed for this article.
Latest from the community
Trilogy Audio 994

Trilogy Audio 994: A Hybrid Monoblock with Three Operating Modes