The Premiera X1S PRO is an professional preamplifier that incorporates a built-in network player, MM/MC phono preamplifier, DAC, Bluetooth capabilities, HDMI ARC, Wi-Fi, and AirPlay 2. Its design embodies the subtle sophistication characteristic of all Premiera offerings, while also providing high functionality to support its wide range of features. The front panel includes vital controls such as volume adjustment, source selection buttons, tone control options, and playback management functions.
The Premiera X1S PRO display offers a wealth of information, while the settings menu is user-friendly and straightforward. It allows users to activate loudness compensation, enable and modify the tone block, adjust the brightness of both the display and buttons, access device information, update software, and restore factory settings if needed. Navigation through the menu is facilitated by the well-known regulator puck or remote control found in other Premiera devices.
There are twelve potential input sources available. The HDMI ARC input enables playback of audio from any contemporary television. Additionally, there are four analog outputs: one designated for recording, two adjustable outputs for connecting a power amplifier (both balanced and unbalanced), and one mono output intended for an active subwoofer. The digital signal is handled by the renowned DAC featuring the ES9018K2M Sabre chip. Furthermore, an extra DAC can be linked to the amplifier, as the X1S PRO includes a coaxial digital output. The IR Trigger Output facilitates remote control of the Premeira power amplifier’s power and functions. The user-friendly Audio System mobile application allows for Wi-Fi connectivity and configuration of the network player.
The X1S PRO premiere is a state-of-the-art preamplifier designed for professional use, featuring an extensive array of additional functionalities. It incorporates the latest advancements in both analog and digital technologies, supports software updates, and offers versatile application options. With outstanding sound quality and a competitive price point that is hard to match by its nearest rivals, it stands out in the market.
Premiera X1S PRO Specifications
- DAC: ES9018K2M Sabre – 32-bit HyperStream™ architecture
- Supports PCM up to 32-bit at 384 kHz
- Supports DSD up to 11.2 MHz
- XMOS firmware: Guaranteed to support DSD – 5.6 MHz
- Frequency Response: 10 Hz – 70 kHz, +/- 1.0 dB
- Channel Separation: Line input > 90 dB
- THD (Total Harmonic Distortion + Noise):
- 10 Hz – 25 kHz < 0.008% in stereo (-10 dBv / RCA)
- Signal-to-Noise Ratio: Line input > 107 dB
- Synchronous and ASRC modes supported: Yes
- Wireless Connectivity:
- Wi-Fi: 2.4 GHz & 5 GHz
- Bluetooth: 5.0 (aptX, aptX HD, AAC)
- Streaming Protocols Supported:
- AirPlay 2
- DLNA
- Third-party Software & Services Support:
- Subject to availability
- Multiroom Support:
- AirPlay 2
- Linkplay
- Application: Audio System
- iOS/Android support
- Nominal Sensitivity:
- RCA line inputs: 630 mV (-4 dBv)
- Balanced XLR input: 1.23 V (+4 dBu)
- Maximum Allowable Signal Level:
- RCA line inputs: 3.17 V
- Balanced XLR input: 6.18 V
- Maximum Output Signal Levels (THD < 0.8% in stereo mode):
- RCA: 5.25 V
- XLR: 6.74 V
- Phono Preamplifier Sensitivity:
- MM cartridges: ≥ 2.5 mV / 47 kΩ / 47 pF (preset)
- MC cartridges: ≥ 0.25 mV / 300 Ω / 470 pF (preset)
- Equalization:
- Low frequency: +/- 10 dB at 100 Hz
- High frequency: +/- 10 dB at 10 kHz
- Power Supply:
- Voltage: 220-240 V, 50 Hz
- Power Consumption: Up to 30 W
- Inputs:
- 1 x RCA stereo MM phono preamp
- 3 x RCA – analog stereo line level (CD, Aux (RCA or XLR), TAPE)
Price: $900
Share your thoughts on this product
Do you own this product or maybe have questions about it? Feel free to share your comments below.