in

Ferrum Broen Gives the Wandla DAC a Streaming Partner

Ferrum Broen streaming transport
Broen is a dedicated network transport with no DAC of its own, designed to work with external converters and communicate directly with Ferrum's Wandla range.

Ferrum's first network player takes an unusual approach to the relationship between a streamer and a DAC. The Broen is a dedicated streaming transport, so it cannot turn digital music into an analog signal on its own. Pair it with one of Ferrum's Wandla converters, however, and a USB connection carries more than audio: it also lets the two components exchange control information. The result is a system that can be operated from the DAC's touchscreen or remote. Broen also works with other external DACs, with a range of digital outputs and Volumio-based playback software.

A transport designed around Wandla

The central idea behind Broen is to separate network playback from digital-to-analog conversion without necessarily making the system feel like two separate products. Ferrum Streaming Control Technology, or FSCT, allows two-way communication between Broen and a Wandla-series DAC over a standard USB connection.

With that pairing in place, listeners can control the transport from Wandla's touchscreen or remote, while the DAC's display shows artist, album and playback status. Ferrum describes the combination as an integrated streaming DAC and preamplifier. The distinction is that its streaming and conversion functions remain in separate boxes, rather than being built into one chassis.

Broen does not depend on a Wandla to operate. Its front panel has playback, track-change and power buttons for standalone use with another DAC. Buyers who already own a converter can therefore use Broen as a digital source, although the Wandla control and display integration is specific to Ferrum's own DAC series.

Angled front view of the Broen, showing three playback buttons and a round power control.
Previous, play/pause and next buttons give the transport physical playback controls, while a separate circular power button sits at the right.

Serce handles the digital handoff

Inside Broen is Ferrum's Serce digital-to-digital converter module, which uses FPGA-based reclocking and low-jitter clocks. The transport's digital outputs are galvanically isolated. These are decisions focused on the signal's journey to an external converter; Broen leaves the subsequent analog conversion to the DAC.

Output choices include AES/EBU on XLR, coaxial and optical S/PDIF, and IยฒS over HDMI. The IยฒS output offers selectable pin configurations, an important provision because the HDMI connector is being used here for IยฒS audio rather than as a conventional video connection. Ferrum also provides two separately powered USB DAC outputs, one Type-A and one Type-C.

That selection gives owners several routes into an external DAC, but the right connection still depends on the inputs and compatibility of the receiving device. In particular, an IยฒS connection should be checked against the DAC's supported pin configuration rather than chosen merely because both components have an HDMI-shaped socket. Trigger input and output are also provided.

Broen rear panel with digital outputs, USB ports, an SFP socket and power connections.
The rear panel places AES, coaxial, optical and I2S outputs alongside USB connections. The socket marked SFP ETH replaces a fixed Ethernet port.

Volumio, local libraries and six zones

Broen runs Volumio OS 4, developed by Ferrum in collaboration with Volumio. Spotify Connect, Tidal Connect and Qobuz Connect are supported, alongside AirPlay, UPnP/DLNA, Bluetooth and internet radio. The transport can also play and rip CDs, and can stream to as many as six synchronized zones.

Roon users should note the distinction in its implementation: a Roon Bridge plugin is available, but Broen is not Roon Ready certified. That makes it important to check the intended Roon setup rather than assume that the plugin and certification are interchangeable.

For music stored locally, an internal M.2 slot accepts NVMe storage in 80 mm or 110 mm lengths, and there are two USB 3.0 ports. Supported file formats include MP3, WMA, AAC, ALAC, FLAC, APE, WAV and DSD. Internal storage gives a library a place within the transport itself, while the service and network options leave room for a system built around streaming rather than owned files.

Three Ferrum components stacked together, with Broen below a DAC and a power unit.
Broen sits beneath the Wandla DAC and a power unit in this stack, showing the shared proportions and matching front-panel accents across the range.

An SFP socket instead of a fixed Ethernet port

Network access is available through dual-band Wi-Fi at 2.4 and 5 GHz or through an SFP port. Ferrum supplies an RJ-45 module for a conventional Ethernet connection; a fiber-optic module is an optional purchase.

The modular arrangement lets the same socket accommodate either wired approach, but fiber requires the additional module rather than being ready to use from the supplied Ethernet fitting. Wi-Fi offers another route for installations where a cable is inconvenient.

Broen can also be paired with Ferrum's Hypsos hybrid power supply through Ferrum Power Link. The connection continuously monitors voltage at the receiving end. For an owner considering the full Ferrum system, Hypsos is a separate upgrade path rather than a feature that replaces the need for an external DAC.

Broen viewed from the front and right, showing its low chassis, feet and vented top.
The low enclosure rests on short feet, with a row of ventilation slots across the top and visible fasteners along the side.

Where Broen fits in Ferrum's range

Based in Warsaw, Ferrum is the brand of electronics company HEM, founded by Marcin Hamerla. HEM previously worked as an OEM manufacturer and, from 2000, designed and manufactured products for Mytek, including the Brooklyn DAC range. After that relationship ended, HEM concentrated on its own Ferrum brand.

The existing lineup includes Hypsos, OOR and Erco headphone amplifiers, and Wandla-series DACs and preamplifiers. Broen adds the network source that was missing from that collection, while its USB control arrangement makes the Wandla relationship more involved than a simple digital-output connection.

Ferrum first showed Broen at the Audio Video Show in Warsaw and the Paris Audio Video Show in autumn 2025. It has since launched and is available through dealers and Ferrum's online store.

Broen appears most directly suited to a Wandla owner who wants to add network playback while retaining the DAC's screen and remote as the main controls. It also has a broader role as a standalone transport for an existing external converter, though buyers outside the Wandla range should assess the available outputs against their DAC's inputs and control preferences. The optional fiber module, internal storage and Hypsos supply offer different ways to configure the system, not necessities for every installation. Roon users have a more specific question to resolve: whether the available Bridge plugin meets their needs without Roon Ready certification. Ferrum has made a flexible source component, but the rest of the system determines which parts of its design will be useful.

STEREOINDEX COMMUNITY

Sound Off

0

Join the discussion if you have something to add.

Add a comment

Your email address will not be published.

Latest from the community
Teacโ€™s Reference 700 Separates Keep Their Compact Form and Rethink the Digital Front End

TEAC’s New Reference 700 Series Packs Serious Hi-Fi Muscle Into Two Compact Boxes

The right AV receiver is not necessarily the biggest or most powerful model. This beginner guide explains which features matter for your room, speakers, sources and future plans.

How to Choose the Best AV Receiver: A Beginnerโ€™s Guide to Home Theater