The new Dynaudio Xeo 10 model replaces the popular Xeo 2 and, despite a certain external similarity, differs from it quite significantly. However, there are certain differences in appearance – there are no visible fastening elements on the front panel now, the speakers are mounted on a cast aluminum panel on the back side.
The Dynaudio Xeo 10 is made in compact damped MDF cases, and thanks to the high-quality external finish, it is perfect for placement in the interior. The design of the new speaker has become even more attractive, with a new aluminum front panel with a rough finish. The external coating of the Dynaudio Xeo 10 is available in matte black (with a black front panel and protective grille) or matte white (with a gray panel and grille).
The speaker is equipped with a new 140 mm woofer with an MSP diffuser and a 28 mm soft dome tweeter. Each emitter is connected to its own amplifier with a power of 65 watts. This solution provides the ability to fine-tune the sound of the speaker, as well as reduce distortion.
The Dynaudio Xeo 10 uses a new algorithm for the overload protection system (limiter), which ensures high-quality sound even at high volume. In addition, the crossover point, which is performed by the DSP, is chosen high here to obtain a more transparent and consistent sound outside the speaker’s acoustic axis.
The Dynaudio Xeo 10 uses a touch controller to control the volume, and it has a circuit for optimizing the sound character depending on the type of speaker placement (near a wall, in a corner, in free space).
To connect signal sources to the Dynaudio Xeo 10, you can use the analog mini-jack 3.5 mm or digital Toslink input, as well as Bluetooth. Like all models in the Xeo series, this speaker can be used in a proprietary wireless system, the signal transmission in which is carried out with the parameters of 24 bit / 96 kHz. To do this, you will need an additional Dynaudio Connect Wi-Fi transmitter , which will become a bridge between the speakers and signal sources, and will also allow you to play music from network drives using the DLNA protocol.
Specifications Dynaudio Xeo 10
Number of bands 2+2 (active + passive speaker systems)
Number of speakers 2+2
Case type bass reflex on the rear panel
Tweeter type 28 mm soft dome tweeter, coated, aluminum voice coil, cooling liquid in the coil gap
Diameter and type of woofer 140 mm, MSP composite diffuser
Frequency range 40 Hz – 21 kHz (± 3 dB)
Inputs linear, optical
Bluetooth yes
Xeo support yes
Amplifier power 2 x 65 W
Input signal TosLink up to 24 bit / 192 kHz
Xeo signal up to 24 bit / 96 kHz
Crossover frequency 5000 Hz
Crossover slope 24 dB / octave
Dimensions (WxHxD) 173 x 255 x 154 mm
Weight 4 kg
Loading ...