The TEAC AI-303 integrated amplifier has a compact size, which allows you to install it on a computer desk or next to a TV. The model differs from its predecessor AI-301DA-X by the presence of an HDMI ARC output and a USB type C connector for connecting portable audio sources. The circuits use selected components designed for Hi-Fi audio and allowing you to unlock the potential of Hi-Res formats. The result, according to TEAC, is a rich musical sound with excellent dynamics.
The final section of the TEAC AI-303 features a high-efficiency Class D amplifier module designed by Hypex, which helps optimize power consumption and is capable of a maximum power of 50 W per channel into 4 ohms. The model received a 32-bit DAC that supports DSD input signals up to 11.2 MHz and PCM up to 32 bit/384 kHz, as well as full MQA decoding. There is also an HDMI ARC output for connecting to a TV and, in addition, optical and coaxial S/PDIF inputs, and a pair of linear RCA inputs are used to connect analog sources. The device has a useful function, thanks to which it can automatically turn on when a digital signal appears and turn off if there is no signal for a certain period of time, which is convenient, for example, when connecting the TEAC AI-303 to a TV via an optical input.
The amplifier is equipped with a Bluetooth module with support for the aptX codec. There is also a high-quality headphone amplifier on board with CCLC (Coupling Capacitor-less Circuit) technology, which makes it possible to do without coupling capacitors in the output stage, which has a beneficial effect on the sound. CCLC delivers fast transient response and rich bass. At the same time, a power of 100 mW is guaranteed when connecting 32-ohm headphones. The model also makes it possible to enhance the low-frequency component of the audio system by connecting a subwoofer, as it has a Subwoofer Out output. Two pairs of high-quality screw terminals are used to connect speaker systems.
Traditionally for TEAC, the model is assembled in an all-metal case with excellent anti-vibration properties. The motorized volume knob and cabinet panels are made from precision machined aluminum. To control TEAC AI-303, a standard mini-remote is provided.
Characteristics TEAC AI-303
Output power 2 x 50 W (4 Ohm, 20 Hz – 20 kHz, THD: 0.1%, JEITA), 2 x 25 W (8 Ohm, 20 Hz – 20 kHz, THD: 0.1 %, JEITA)
Harmonic distortion 0.01% (1 kHz, 8 Ohm, 1 W)
Signal-to-noise ratio 95 dB (line input)
Frequency response 2 Hz – 100 kHz (- 5 dB)
Headphone amplifier power: 2 x 100 mW (32 ohms, 1 kHz, THD: 0.1%), harmonic distortion: 0.005%
Bluetooth version 4.2 + EDR, profiles: LDAC, LHDC, Qualcomm® aptX™ HD audio, Qualcomm® aptX™ audio, AAC, SBC
Inputs 2 x Linear RCA, HDMI EARC, Optical (PCM up to 24bit/96kHz), Coaxial (PCM up to 24bit/192kHz), USB Type C
Outputs 6.3mm headphone jack, RCA subwoofer
Supported sample rates: LPCM 32k / 44.1k / 48k / 88.2k / 96k / 176.4k / 192 kHz, 16 / 24 bit, DSD 2.8 MHz (DoP 176.4 kHz / 24 bit)
Power consumption 38 W
Output on AC 2 pairs of screw terminals
Acceptable impedance AC 4-8 Ohm
Remote control
Dimensions (WxHxD) 215x61x254 mm
Weight 2.3 kg
Share your thoughts on this product
Do you own this product or maybe have questions about it? Feel free to share your comments below.