in

Pro-Ject’s Amp Box S3 L gives its compact power amplifier more room to grow

Pro-Ject Audio Amp Box S3 L: compact two-channel power amplifier
Pro-Ject expands its compact amplifier range with a larger stereo power amp rated at 80 watts per channel into 8 ohms and designed to partner a separate preamp.

Pro-Ject’s compact amplifier range now has an option for listeners who want more power without moving to a full-size component. The Amp Box S3 L builds on the smaller Amp Box S3 concept with a larger enclosure and a substantial increase in stated power reserves. It remains a two-channel power amplifier rather than an all-in-one unit, so it is intended to sit downstream of a separate preamplifier. A new amplification module, dual-mono channel layout and external power supply define the design, while an RCA input and conventional speaker terminals keep its role in a stereo system straightforward.

2026 11 18 Pro JectAudioAmpBoxS3L BlackFront 1200x600

More power from the S3 concept

The distinction between the Amp Box S3 L and the smaller Amp Box S3 is not simply the extra letter in the name. Pro-Ject has given the L a larger chassis and considerably greater stated power reserves, extending the compact amplifier idea toward systems that need more output. The announcement does not specify a power rating for the smaller model, so the size of that increase cannot be quantified from the supplied figures.

The Amp Box S3 L is rated at 80 watts per channel into an 8-ohm load and 140 watts per channel into 4 ohms. Pro-Ject positions it for larger listening rooms and speakers with higher power requirements. Those ratings give prospective buyers a starting point for matching it to their speakers, although room size, listening level and speaker sensitivity also matter when deciding how much power a system needs.

The rating rises as the specified load impedance falls, but the announcement does not establish performance at impedances below 4 ohms. Owners of demanding speakers will therefore need more information before treating the figures as a complete guide to compatibility.

Overhead view of an amplifier’s circuit board mounted inside a black chassis.
The overhead view shows how the amplifier’s board sits within the compact enclosure, with open space around its sides.

A new module and separate stereo channels

Inside is a newly developed, energy-efficient amplification module. Pro-Ject’s stated aim was to combine the compact size and efficiency associated with modern digital amplifiers with a sound character reminiscent of classic tube amplifiers. That is a design objective, not a listening result; the announcement does not establish how closely the finished amplifier achieves it.

The two channels use a dual-mono configuration and are amplified independently. Pro-Ject intends that separation to reduce interference between the left and right channels and support precise spatial reproduction. It is a description of the circuit’s intended behavior, rather than a measurement of channel separation or a guarantee of a particular soundstage.

The supplied information does not identify the module’s amplifier class or describe separate power supplies for the two channels. What is clear is the basic engineering priority: retain a compact, efficient package while giving the left and right signals their own amplification paths.

Silver Amp Box S3 L stacked on a Pre Box S3 with volume and input controls.
The power amplifier sits above the matching Pre Box S3, whose front panel carries the volume knob, headphone socket and input selection controls.

A power amp built around a preamp

A stereo RCA input provides the connection from a preamplifier. Pro-Ject recommends its own Pre Box S3 as a partner, placing the Amp Box S3 L within a compact separates system rather than presenting it as a standalone hub for sources. Buyers should account for the preamp and its connections when planning the complete setup.

A 12-volt trigger input adds a useful link between the components. With a suitably equipped preamp, it allows the power amplifier to switch on and off alongside it, reducing the need to operate both units separately. The trigger does not replace the RCA audio connection; it is there for coordinated power control.

At the speaker end, the terminals accept banana plugs, spades or bare wire. That choice accommodates several common cable terminations, so an existing pair of speaker cables may be usable without changing how they are terminated.

Two white bookshelf speakers flank a small silver amplifier and preamp stack.
A pair of bookshelf speakers frames the compact amplifier and preamp stack, illustrating the system’s modest footprint on a wide shelf.

Small chassis, external supply

The aluminum enclosure measures 206 × 55 × 163 mm, including the connections. It gives the L more space than its smaller relative while remaining compact for a stereo power amplifier. Those dimensions cover the amplifier itself, but a system plan also needs to make room for the separate 36-volt power adapter.

Moving the supply outside the main enclosure is a practical part of the compact layout: the amplifier chassis does not have to accommodate the entire power supply. Pro-Ject also says the aluminum enclosure protects the electronics against external interference. No measurements are provided to quantify that protection.

2026 11 18 Pro JectAudioAmpBoxS3L SilverFront 1200x600

Standby consumption is specified at less than 0.5 watts. The amplifier is built in Europe and offered in black or silver, giving buyers a choice of finish when pairing it with the rest of their equipment.

The Amp Box S3 L looks best suited to a listener building a compact stereo system around separate components, particularly one who wants more amplifier output than the smaller S3 concept provides. Its RCA input makes the preamp choice central to the system, while the trigger connection is a convenience for compatible partners. Speaker matching remains the important question: the published 8- and 4-ohm ratings are useful, but they do not answer every question about difficult loads or performance in a particular room. Pro-Ject has announced the amplifier in two finishes, but the supplied information does not establish a US price or release date. Those details, along with independent listening and further specifications, remain worth checking before purchase.

STEREOINDEX COMMUNITY

Sound Off

0

Join the discussion if you have something to add.

Add a comment

Your email address will not be published.

Latest from the community
Klipsch Stratos HP-2 and HP-3 Put Two Drivers Inside Wooden Ear Cups

Klipsch Stratos HP-2 and HP-3 Put Two Drivers Inside Wooden Ear Cups

Chord Electronics Ultima 7 stereo power amplifier

Chord Ultima 7 puts Class G power in a shallower stereo amplifier