Audio-Technica has broadened its range of direct drive turntables with the introduction of the Audio-Technica AT-LP8X semi-automatic model. This turntable is equipped with an innovative tonearm lifter that automatically elevates the tonearm at the conclusion of a record and halts the motor.
Drawing inspiration from the iconic AT models of the 1960s and 70s, this J-shaped aluminum turntable tonearm incorporates a modern Audio-Technica AT-LT10 body paired with an AT-VM95E BK (black) cartridge. The cartridge features a 0.3 x 0.7 mil elliptical stylus, ensuring exceptional channel separation and minimal distortion for outstanding sound quality. For convenient setup, the stylus can be swapped out with any of five additional +VM95 styli. Additionally, the arm’s vertical tilt adjustment and increased weight facilitate compatibility with a diverse array of other cartridges.
The Audio-Technica AT-LP8X is capable of playing records at speeds of 33-1/3, 45, and 78 rpm. It features a 25mm anti-resonance die-cast aluminum platter, which is topped with a 2.5mm thick rubber layer and includes a rubber mat. The platter is driven by a sensor-controlled motor that guarantees consistent and accurate rotation speed. This motor, along with its efficient internal switching power supply, is integrated into a box-shaped plinth constructed from 16mm thick MDF (medium density fiberboard) and is fitted with height-adjustable feet to effectively minimize noise and vibration interference.
The Audio-Technica AT-LP8X turntable features an automatic tonearm lift at the conclusion of a record, along with a motor that halts operation—an uncommon attribute for direct-drive turntables. This functionality allows you to enjoy your music in a leisurely setting without the concern of the record finishing unexpectedly. Additionally, the turntable is equipped with an AT-VM95E cartridge, which is compatible with any replacement stylus from the Audio-Technica VM95 series. This compatibility facilitates experimentation with various stylus profiles, enabling upgrades to higher-quality options for enhanced sound or the ability to switch to the AT-VMN95SP stylus for 78 rpm records.
The turntable features a sturdy MDF base, adjustable feet, and a thick die-cast aluminum anti-resonance plate equipped with a rubber damper, all designed to minimize unwanted noise and vibrations. This ensures that you can appreciate every nuance of your music. Additionally, the turntable includes a detachable RCA output cable (dual RCA to dual RCA with ground), a 45 RPM adapter, and a removable hinged dust cover.
Audio-Technica AT-LP8x Specifications
- Direct drive
- Speeds 33-1/3 rpm, 45 rpm, 78 rpm
- Turntable platter Cast aluminum, rubber damper
- Starting torque 1.0 kgf.cm
- Brake system Electronic brake
- Signal-to-noise ratio > 60 dB
- Cartridge type VM (AT-VM95EBK)
- Output level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec
- Power requirements 100–240 V, 50/60 Hz
- Power consumption 8 W
- Dimensions 450 mm (18″) × 352 mm (14″) × 161 mm (6.3″) (W×D×H)
- Weight Approx. 10.4 kg (23 lb)
- Tonearm type Statically balanced J-shaped tonearm
- Effective length Tonearm 247 mm (9.7 in)
- Projection 15 mm (0.59 in)
- Tracking Error Angle Less than 2.0°
- Stylus Pressure Adjustment Range 0.0 to 4.0 g
- Applicable Cartridge Weight 14.0 – 20.0 g (including cartridge) (When using the optional counterweight: 17.5 – 23.5 g)
- Replacement Stylus AT-VMN95EBK
- Replacement Cartridge AT-LT10
Share your thoughts on this product
Do you own this product or maybe have questions about it? Feel free to share your comments below.