SMSL DL200 is a high-performance DAC equipped with high-quality components such as ES9039Q2M IC, XMOS XU316 USB interface and Qualcomm Bluetooth receiver IC. The DL200 is capable of decoding high sample rates, up to PCM 32bit 768 kHz, DSD512 and DoP64. It can also decode MQA files up to MQA-CD. But that’s not all: the DL200 also doubles as a headphone amplifier thanks to its two outputs (6.35mm and 4.4mm balanced). Overall, the device has a wide range of connections, including a USB-C input, a Toslink optical input, a coaxial input, as well as an RCA output and a balanced output on a 6.35mm TRS jack.
The DL200 has built-in 7 PCM filters and DPLL (Digital Phase Locked Loop), allowing you to significantly improve the clock frequency of the input signal if necessary.
SMSL offers the DL200, capable of decoding up to PCM 32-bit 768 kHz, DSD512 and DoP64 thanks to the ES9039Q2M 32-bit stereo DAC chip using Hyperstream® IV Dual Dac™ technology and advanced SABER HiFi® architecture. In addition, it is equipped with an MQA decoder, allowing it to accept MQA-CD streams.
The Qualcomm Bluetooth receiver chip supports LDAC 24-bit/96 kHz, aptX HD, adaptive aptX, SBC and ACC formats.
An infrared remote control allows you to control the DL200 remotely, making your listening experience more enjoyable. In the DL200 menu you can configure all available parameters.
There are two headphone outputs on the front panel of the DL200. One 6.35mm jack and one 4.4mm balanced jack. The output power allows the SMSL DL200 to power a wide range of headphones and earbuds from 16Ω to 300Ω.
Characteristics of SMSL DL200:
- Item Type: DAC/Headphone Amplifier
- DAC chip: ES9039Q2M
- OPA: 4x OPA1632
- Inputs: 1x USB-C/ 1x optical Toslink/ 1x coaxial SPDIF/ Bluetooth
- Outputs: 1x RCA stereo / 1x TRS stereo balanced / / 6.35 mm headphone output / 4.4 mm jack headphone output
- Output Level: RCA: 2.5 Vrms/ TRS: 5 Vrms
- Headphone output power: 2x 3W @16 Ω / 2x 1.5 W @32 Ω
- Headphone Gain: Low : 0dB/ High : 11dB
- THD+N: Line Outs: 0.00006% (-123 dB)/Headphone Outs: 0.00009% (-120 dB)
- Dynamic Range: TRS: 130 dB/ RCA: 127 dB/ Headphone Outputs: 125 dB
- SNR: TRS: 130 dB/ RCA: 127 dB/ Headphone Outputs: 125 dB
- Output Impedance: Line Outputs: 100Ω/Headphone Outputs: Close to 0dB
- USB data transfer protocol: 1.1 and 2.0 (asynchronous)
- USB Compatibility: Windows 7/8/9/10/11 (with driver)/ Android/ Max OSX 10.6 and above/ Linux (without driver)
- Bit depth: USB: 16-32 bits / Optical / SPDIF: 16-24 bits
- Supported sample rates: USB: PCM 32bit 768kHz, native DSD up to DSD512/ Optical and Coaxial: PCM 24bit 192kHz and DoP64
- Bluetooth: 5.1
- Supported Bluetooth codecs: LDAC, aptx HD, aptX adaptative, AAC, SBC
- Power consumption: <30W
- Standby power consumption: <0.5W
- Dimensions: 221.9 x 31 x 206.7 mm
- Weight: 1,390 kg
- Black color
