INTUAURA Uniqueness is a new multi-driver in-ear headphone designed for those who seek an unusual sound and maximum integrity of delivery. After many years of work to eliminate typical problems of multi-driver systems – inconsistencies in tonality, gaps between ranges and increased distortion – INTUAURA engineers have developed a model in which the sound is delivered integrally and cleanly from the very beginning.
The entire sound setup is implemented exclusively with the help of acoustic solutions. Without the use of damping, the bass and high-frequency tubes provide deep and at the same time airy edges of the range, and low-resistance tubes in the midrange add body without losing transparency. There are no resistors in the crossover circuit: only capacitors with gold-plated Immersion Gold contacts – this eliminates power loss and influence on the tonal balance. A dynamic emitter with dual N52 magnets and a lightweight CCAW voice coil is responsible for the confident delivery of low frequencies. And the diaphragm made of a double alloy, close in properties to beryllium, allows you to expand the range and minimize distortion.
INTUAURA abandoned the simplified approach to sound through the frequency response – instead, the emphasis is on the integrity and naturalness of the delivery. The sound is characterized by a linear response, low distortion, accurate phase synchronization and resistance to reverberations. Balanced armature drivers for the mids are complemented by Knowles acoustic dampers, providing a clear but not harsh sound of voices. The bass remains weighty but controlled, the mids are transparent, and the highs are sparkling but not fatiguing.
Despite the presence of five emitters, the Uniqueness body does not exceed the dimensions of conventional single-driver models. It is printed from medical resin with high precision, fits easily into the ear and is suitable even for compact auricles, allowing you to listen to music for hours without fatigue.
The complete cable is made of purified copper with a 0.78 mm connector and a metal body with a curved shape. It provides stable conductivity and adds a recognizable accent to the design of the device.
INTUAURA Uniqueness Features :
- Frequency range: 5 Hz – 50 kHz
- Operating frequency range (according to IEC 60318-4): 20 Hz – 20 kHz
- Impedance: 16 ohms ±5%
- Sensitivity: 130 dB/V at 1 kHz ±3 dB
- Harmonic distortion (THD): less than 0.4% at 1 kHz
- Driver configuration: 1 x 10mm dynamic / 4 x armature
- Body material: medical resin (3D printing)
- Headphone jack: 0.78mm two-pin
- Cable connector: 3.5mm / 4.4mm
- Cable length: 1.2m ±0.1m
