The Dayton Audio HTA20 is the perfect solution for enjoying the warm sound of a tube amplifier. With its hybrid design, it combines the vintage sound of tube amps with the modern convenience of solid-state amps. This allows you to achieve a unique combination of vintage and modern technologies.
With an output of 2x15W RMS into a 4Ω load, the HTA20 is ideal for integration into a small to medium sized HiFi system. In addition, it has a convenient Bluetooth 5.0 interface, which allows you to listen to music in streaming mode and control it remotely, for example, from a smartphone or tablet.
There is often debate about which tube or transistor amplifier produces the better listening experience. The HTA20’s hybrid design puts an end to this debate by providing the best of both worlds. Thus, the amplifier uses a classic class AB design and uses tubes in the preamp circuitry.
With two stereo RCA inputs and a USB-B port, the Dayton Audio HTA20 is versatile, allowing you to connect it to a wide range of source devices. In addition to the speaker terminals, the Dayton Audio HTA20 also has an RCA subwoofer output and a 6.35mm headphone output.
Dayton Audio HTA20 Specifications:
- Product Type: Amplifier
- Inputs: Bluetooth 5.0/ 1* USB-B/ 2* stereo RCA
- Outputs: Speaker terminals/ 1* RCA subwoofer output/ 1* Jack 6.35 mm headphone output
- Amplification Type: Class AB
- Pre-amplification: Tubes
- Tubes: 2* 6F1
- Output Power: 2x15W RMS @ 4 ohms
- THD: <0.5% @ 15W RMS
- Minimum speaker impedance: 4 ohms
- Total gain: 28 dB
- SNR: 75 dB
- Frequency response: 20Hz-20kHz (1dB)
- Input sensitivity: 315 mV
- Channel Separation: 53 dB
- Supported sampling rates (USB): PCM up to 32 bit 192 kHz
- Supported Bluetooth codecs: SBC, AAC
- Supply voltage: 110-220V AC 50/60Hz
- Power consumption: 8 W
- Dimensions: 279x165x216 mm
- Weight: 1.15 kg
- Color: noir
