Developed in collaboration with the Starke Sound team, the EverSolo AMP-F2 is a Class D amplifier based on the integration of the innovative NS600 module. Thanks to this, it has a large supply of energy, excellent dynamics and high-precision sound. The all-new SAPS switching power supply supplies the audio circuit with a clean electrical signal, ensuring very low noise and distortion levels. The AMP-F2 is a versatile model that can be used in both stereo and mono.
Based on Starke Sound’s NS600 Class D amplifier module, the EverSolo AMP-F2 is capable of delivering significant power – up to 2x250W RMS into 4 ohms (1% THD). When using the amplifier in bridge mode (BTL), i.e. in mono, its power increases to 450 W RMS into a 2 ohm load (1% THD). This ability to maintain very low load impedances ensures sufficient power even in configurations using particularly demanding speaker systems.
The NS600 EverSolo AMP-F2 module features PurePath™ Ultra-HD technology and an advanced feedback design that includes error correction. This technology achieves extremely low distortion throughout the entire frequency range, resulting in impeccable sound fidelity.
Equipped with a 5-12V trigger input and a 3.5mm jack output, the EverSolo AMP-F2 allows you to create an automatic on/off chain between different devices equipped with triggers. This ensures ease of use as the entire audio system can be turned on and off with just one click.
The EverSolo AMP-F2 amplifier is perfectly designed and optimized to work with other brand products. It’s the perfect companion for the EverSolo DMP-A6, EverSolo DMP-A6 Master Edition, EverSolo DMP-A6 Master Edition Upgrade and EverSolo DMP-A8 streamers, as well as the EverSolo DAC-Z8 and EverSolo DAC Z6 DACs.
Using a 600W power supply with high efficiency, low ripple and EMI, the EverSolo AMP-F2 is capable of delivering stable and powerful output, improving overall system dynamics.
The EverSolo AMP-F2 amplifier is made in a modern, durable aluminum housing. Aesthetically pleasing, it also acts as a shield, limiting the impact of interference on the AMP-F2’s circuitry.
EverSolo AMP-F2 Features:
- Product Type: Amplifier
- Amplifier Type: Class D
- Output Power: 2x250W RMS @ 4 ohms (1% THD) / 2×145 Watts @ 8 ohms (1% THD)
- Output Power (BTL): 280 W RMS @ 4 ohms (1% THD) / 450 W RMS @ 2 ohms (1% THD)
- Inputs: Single ended RCA/Balanced XLR
- Outputs: Speaker Terminals (Beryllium Copper)
- Gain: 21.5 dB
- Frequency response: 10 Hz – 20 kHz (-1 dB)
- Max. output current per channel: 16.5A/33A (BTL)
- THD: 0.003% @ 10 W, 1 kHz
- SNR: > 110 dBA @ 4 ohms, 260 W
- Input Impedance: RCA: 11k Ohm/XLR: 22k Ohm
- Input sensitivity: 2.7V
- Output impedance: 0.136 ohms (5 Hz à 100 kHz)
- Minimum load impedance: 0.8 ohm
- Damping factor: 100
- Balanced scheme
- Trigger input and output 5-12V
- Supply voltage: 115VAC – 230VAC (switchable)
- Heat: 65BTU/hour
- Consumption: Standby: ≤ 0.5W / Standby: ≤ 14W / Max: 900W
- Dimensions: 270 x 228 x 80 mm
- Housing material: Aluminum
- Weight: 3.65 kg
