{"id":151604,"date":"2022-12-02T16:44:59","date_gmt":"2022-12-02T16:44:59","guid":{"rendered":"https:\/\/www.techweekmag.com\/?p=151604"},"modified":"2022-12-02T16:56:53","modified_gmt":"2022-12-02T16:56:53","slug":"how-to-set-up-your-lg-oled-2022-tv","status":"publish","type":"post","link":"https:\/\/www.stereoindex.com\/tech\/tv\/how-to-set-up-your-lg-oled-2022-tv\/","title":{"rendered":"How to set up your LG OLED 2022 TV"},"content":{"rendered":"

Today we will prepare a guide to adjust the picture of LG OLED 2022 TV with the best possible settings.\u00a0When we buy a new TV, the same thing always happens.\u00a0The rush makes you tune the TV as you like.\u00a0We even forget to check the state of the matrix and make the mistake of leaving the default TV picture mode (usually Standard).<\/p>\n

\"LG
LG OLED C2<\/figcaption><\/figure>\n

But we recommend taking a little time to set it up in an optimal way.\u00a0To help you get the best LG OLED settings (\u00a0A2\u00a0,\u00a0B2\u00a0,\u00a0C2\u00a0and\u00a0G2\u00a0) for your preference, we’ll start with the factory settings.\u00a0And then we will modify each of them to taste, adding here, removing there, raising one or another value a little, but always keeping them within \u201creasonable\u201d limits.<\/p>\n

Samsung Neo QLED TV Comparison 2021: The main differences between the models<\/a><\/p>\n

LG OLED TV settings (calibration)<\/h2>\n

Picture Mode Options<\/h3>\n

With these settings, we’ll walk through what each setting does in turn.\u00a0We then summarize the best settings and picture modes for each type of content (SDR, HDR, DVB, consoles, PC, etc.) in the table you will find at the end of the article.\u00a0To go to the described parameters, select the desired image mode, and then “Advanced settings”.<\/p>\n

In addition to mode selection and basic image settings, LG webOS 22 offers options to turn on director’s mode and reduce blue (select a warmer color temperature).\u00a0When FILMMAKER MODE is set to “On”, the LG OLED TV will automatically detect when cinema content (movies and series) is being broadcast and automatically switch to this picture mode.<\/p>\n

\"\"<\/p>\n

In the advanced settings of the LG OLED 2022 TV, we will find three sections: Brightness, Color and Sharpness.\u00a0Let’s start with a group of parameters related to brightness:
\nOLED Pixel Brightness<\/strong>\u00a0: controls the amount of light emitted by the panel.
\nContrast Adjustment<\/strong>\u00a0: Responsible for adjusting the difference in glow between the darkest and
\nlightest areas of the screen, affecting the white color.
\nPanel Brightness<\/strong>\u00a0: Responsible for adjusting the brightness that affects blacks.
\nAuto Dynamic Contrast<\/strong>\u00a0: Applies a contrast optimization algorithm
\nbased on the brightness of the image to provide a more contrasty feel.\u00a0In HDR mode
\nOn 2017 OLED displays, enable Active HDR (dynamic metadata generator).
\nDynamic Tone Processing<\/strong>\u00a0(appears only in HDR): Adjusts the brightness of HDR content
\naccording to the panel’s maximum light output by dynamically changing the PQ EOTF curve.
\nPeak<\/strong>\u00a0Luminance : Allows you to increase the brightness of the white sub-pixel.
\nGamma (brightness control)<\/strong>\u00a0: this option allows us to switch between different
\ngamuts: BT.1886 (equivalent in OLED to 2.4), 2.2, 2.4 and S.
\nVideo range<\/strong>\u00a0: allows us to switch between HDMI video range (16-235) and
\nPC \/ consoles (0\u2013255).
\nEye Protection<\/strong>\u00a0: Applies a warmer color temperature to the image.<\/p>\n

After experimenting with the adjustments and catching our breath, we move forward.\u00a0Next in line is the Chromaticity section: Color
\nDepth<\/strong>\u00a0: controls the overall color saturation of the panel.\u00a0It is recommended not to abuse.
\nTint<\/strong>\u00a0: Allows you to correct the phase error between the sender and receiver of the NTSC signal.\u00a0It is recommended not to touch.
\nColor Temperature<\/strong>\u00a0: Shifts the set of colors towards a colder or warmer image (in other words, more bluish or more yellowish).
\nColor<\/strong>\u00a0gamut : allows us to switch between different color ranges (Rec.601, Rec.709 and BT.202), including automatically.
\nColor adjustment<\/strong>\u00a0: allows us to change the saturation and brightness of the colors (only used with a sensor).
\nWhite balance<\/strong>\u00a0: allows us to change the color temperature in steps of 1, as well as 22 gamma points.<\/p>\n

What\u2019s the difference between LG C2 and LG G2<\/a><\/p>\n

And to finish, let’s go back and go to the last section Clarity: Clarity
\nAdjustment<\/strong>\u00a0: applies an unsharp mask to simulate sharpening.\u00a0It is recommended not to abuse.
\nSuper Resolution<\/strong>\u00a0: Applies an unsharp mask and various haze suppressors.\u00a0Not recommended for use.
\nNoise Reduction<\/strong>\u00a0: Removes digital noise from an image at the cost of losing fine detail.
\nMPEG Noise Reduction<\/strong>\u00a0: Removes the noise that occurs when an image is compressed due to the loss of fine details.
\nSmooth Gradation<\/strong>\u00a0: Applies deinterlacing to improve color gradations, it is recommended not to go below a low value.
\nReal cinema<\/strong>: In 24p sources and when switching to the player, the TV will output at 120Hz (Pulldown 5:5) repeating the same frame 5 times.\u00a0Highly recommended.
\nTruMotion<\/strong>\u00a0: An interpolator that calculates artificial frames to add smoothness to moving objects.\u00a0But the higher, for example, the value of De-Judder, the more artifacts it will create when reducing jitter.\u00a0It is recommended to deactivate it or activate it with low values \u200b\u200b(eg 3 De-Judder, 0 De-Blur).\u00a0The OLED Motion Pro option, which alternates black frames between each frame, increases the smoothness of motion but reduces the brightness.<\/p>\n

Looking for a bargain? Check out the 8 best TVs of 2021<\/a><\/p>\n

Best settings for LG OLED<\/h3>\n

And that concludes our explanation of what each option does.\u00a0Now we should take stock, that is, figure out which options to activate and which not, and what value to assign to each of them, depending on the content that we see on the screen.\u00a0As we said at the beginning of the article, take this as a basis from which you can customize the LG screen to your liking.<\/p>\n

In HDR and SDR modes, the parameters are set closest to the reference image calibrated with the sensor.\u00a0The values \u200b\u200bfor DVB (Digital TV) can be ignored as you can set the values \u200b\u200byou like best here.\u00a0We have left you a few recommended ones, but they can be changed.\u00a0For greater convenience, we have reduced the sets of parameter values \u200b\u200b\u200b\u200binto three tables – for SDR and TV content, for HDR and for games.<\/p>\n

Summary<\/h3>\n

With these simple steps, you can tune your TV accurately enough without resorting to professional probes and spectrometers.\u00a0But at least you’ll be using a fairly proper base.\u00a0To achieve higher accuracy, it is necessary to hire a professional calibration service using colorimetric sensors.<\/p>\n","protected":false},"excerpt":{"rendered":"

Today we will prepare a guide to adjust the picture of LG OLED 2022 TV with the best possible settings.\u00a0When we buy a new TV, the same thing always happens.\u00a0The rush makes you tune the TV as you like.\u00a0We even forget to check the state of the matrix and make the mistake of leaving the […] More<\/a><\/p>\n","protected":false},"author":10402,"featured_media":151607,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[641],"tags":[779],"class_list":{"0":"post-151604","1":"post","2":"type-post","3":"status-publish","4":"format-standard","5":"has-post-thumbnail","7":"category-tv","8":"tag-news"},"acf":[],"aioseo_notices":[],"amp_enabled":true,"_links":{"self":[{"href":"https:\/\/www.stereoindex.com\/tech\/wp-json\/wp\/v2\/posts\/151604","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.stereoindex.com\/tech\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.stereoindex.com\/tech\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.stereoindex.com\/tech\/wp-json\/wp\/v2\/users\/10402"}],"replies":[{"embeddable":true,"href":"https:\/\/www.stereoindex.com\/tech\/wp-json\/wp\/v2\/comments?post=151604"}],"version-history":[{"count":0,"href":"https:\/\/www.stereoindex.com\/tech\/wp-json\/wp\/v2\/posts\/151604\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.stereoindex.com\/tech\/wp-json\/wp\/v2\/media\/151607"}],"wp:attachment":[{"href":"https:\/\/www.stereoindex.com\/tech\/wp-json\/wp\/v2\/media?parent=151604"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.stereoindex.com\/tech\/wp-json\/wp\/v2\/categories?post=151604"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.stereoindex.com\/tech\/wp-json\/wp\/v2\/tags?post=151604"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}