{"id":130776,"date":"2021-05-14T08:05:06","date_gmt":"2021-05-14T07:05:06","guid":{"rendered":"https:\/\/www.techweekmag.com\/?p=130776"},"modified":"2021-05-14T08:05:06","modified_gmt":"2021-05-14T07:05:06","slug":"modal-electronics-skulptsynth-se-four-part-synthesizer-with-improved-ergonomics","status":"publish","type":"post","link":"https:\/\/www.stereoindex.com\/tech\/hi-fi\/modal-electronics-skulptsynth-se-four-part-synthesizer-with-improved-ergonomics\/","title":{"rendered":"Modal Electronics SkulptSynth SE: Four-part synthesizer with improved ergonomics"},"content":{"rendered":"

With SkulptSynth SE, Modal Electronics has tried to improve the experience of using the tool, and even lower its price by one and a half times. At the same time, the equipment of the novelty is practically not cut. SkulptSynth SE is a four-voice analog synthesizer. On board there are 32 oscillators with a two-pole resonant filter, the frequency range of which can be tuned from low to high frequencies in a band-pass version.<\/p>\n

<\/figcaption><\/figure>\n

Special curves can be used for filter, gain and modulation.\u00a0There are two Low Frequency Oscillators (LFOs), one of which is polyphonic.<\/p>\n

The synthesizer does not directly support MIDI Polyphonic Expression, but connecting a compatible controller will allow you to get a budget option already with the capabilities of a musical instrument.\u00a0All this is complemented by an arpeggiator function, a 256-step sequencer and built-in distortion and delay effects.<\/p>\n

<\/figcaption><\/figure>\n

The novelty is connected via MIDI and USB, there is a headphone control, supplemented by an analog line-out, as well as an analog sync input and output.\u00a0The novelty can also be used autonomously – there is a battery power supply.<\/p>\n

In the US, the SkulptSynth SE synthesizer will cost $ 200.<\/p>\n

Rate this product <\/p>