Schiit Valhalla 3
Schiit Valhalla 3
Schiit Valhalla 3

Schiit Valhalla 3: A Purist’s Tube Amp for High-Impedance Headphones

Schiit Audio has officially launched the third generation of its iconic tube headphone amplifier—the Valhalla 3. Priced at $499, this newest iteration is not merely a refresh of the well-loved Valhalla 2; it’s a complete reimagining designed with audiophiles and high-impedance headphone users in mind.

Schiit Valhalla 3 – A Tube Headphone Amplifier That Can Handle the Toughest Loads
Schiit Valhalla 3 – A Tube Headphone Amplifier That Can Handle the Toughest Loads

According to Schiit co-founder Jason Stoddard, the Valhalla 3 is “completely different” from its predecessor. Drawing inspiration from the company’s high-end Folkvangr amplifier, the Valhalla 3 employs a pure Class A triode topology and a fully OTL/OCL (Output Transformer-Less / Output Capacitor-Less) architecture. This means there are no output transformers or capacitors in the signal path—just unfiltered, direct tube power for an uncompromising listening experience.

The Schiit Valhalla 3 amplifier features a load-impedance switch that allows the amplifier's output stages to seamlessly interact with a wide range of headphone impedances.
The Schiit Valhalla 3 amplifier features a load-impedance switch that allows the amplifier’s output stages to seamlessly interact with a wide range of headphone impedances.

Built for Precision and Power

One of the standout features of the Valhalla 3 is its load-impedance switch, allowing the amp to adapt effortlessly to a wide variety of headphone impedances. It also offers three gain settings—including a zero-feedback mode—tailored for optimal performance with high-impedance headphones. Whether you’re powering vintage 600-ohm cans or more modern 300-ohm models, the Valhalla 3 delivers nuanced control and rich, authentic tube sound.

Schiit Valhalla 3
Schiit Valhalla 3

Under the Hood: Specifications

  • Output Power: 750 mW @ 32 Ohms, 250 mW @ 300 Ohms

  • Gain Levels:

    • Low Gain: 1.25x

    • High Gain: 6x

    • No Feedback Mode: 10x

  • Output Impedance:

    • Low Gain: 25 Ohms

    • High Gain: 40 Ohms

    • No Feedback: 60 Ohms

  • Preamplifier Output Impedance: <200 Ohms

  • Tube Complement:

    • Preamp: 6N1P (compatible with 6DJ8, 6922)

    • Output: 6N6P

  • Max Heater Current: 2.7 A

  • Frequency Response: 20 Hz – 20 kHz (±0.05 dB)

  • THD+N (at 1V RMS into 300 Ohms):

  • Signal-to-Noise Ratio:

    • Low Gain: >110 dB (A-weighted)

    • High Gain: >95 dB (A-weighted)

  • Channel Crosstalk: <-75 dB (20 Hz–20 kHz into 300 Ohms)

  • Input Impedance: 50 kOhm

  • Dimensions: 23 x 8.3 x 15.2 cm

  • Weight: 3.16 kg

With its unique circuitry, vintage-style warmth, and modern engineering precision, the Schiit Valhalla 3 isn’t just an update—it’s a reinvention. For tube amp purists and headphone enthusiasts alike, this may be one of the most compelling offerings in its price range.